Digimerge DH200 Operations Instructions download pdf (Page 18)

USING THE SYSTEM

To power the system ON/OFF:

1. Connect the power cable to the port on the rear panel.

2. Press the

POWER button on the front panel or remote control.

NOTE: You need to press the Power button for initial startup

only

. The system will load the live

viewing screen on subsequent resets.

NOTE: You will need to input your system password to power off the system.

Quick Setup

By default, the system has Quick Setup disabled. Quick Setup lets you quickly adjust the time and

record mode on the system. The system menu will appear as the Quick Setup menu with only Time

and Record options available.

Using Quick Setup

Use Quick Setup to set the time and configure basic recording settings.

To set the time:

1. Under the Time tab, select

DATE and press the ENTER button. Enter the month, day, and year.

2. Select

TIME and enter the time (hh/mm/ss).

NOTE: If using the mouse, you will enter the date and time with the Virtual Keyboard.

3. Press the

ENTER button to save your changes.

To configure recording settings:

1. Stop ALL RECORDING on the system. Enter your system password (by default, 000000).

2. Under the RECORD tab, select RECO

RD MODE and select one of the following: CIF 4CH,

FIELD 4CH, FRAME 4CH, CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF + FRAME.

NOTE: If "CIF + FRAME" recording mode is selected, only channel 1 will record in frame—the

remaining channels will record in CIF.

3. Under the RECORD tab, select RECO

RDING DAYS. Press the +/ - buttons and select 12

HOURS, 1~6 DAYS, 1~20 WEEKS, or NONE.

The default system password is 000000

Figure 2.0 Quick Setup menu

To access the Quick Setup

menu, from the Main menu,

select

Display>Quick Setup.

Then select "ON" to enable

Quick Setup.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 163 164

No comments

Digimerge DH200 Operations Instructions Page 18