-3-
Indoor Dome package contains the following:
Camera in housing ---------------------------------1
Camera Locking screws (PA3 Type) -----------2
Instruction guide (This Document) -------------1
Surface & Flush Mounting Templates----------2
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1
Vandal Dome package contains the following:
Camera in housing ---------------------------------1
Camera Locking screws (PM4 Type) ----------3
Instruction guide (This Document) -------------1
Surface Mounting Template ----------------------1
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1
Tamper allen key ------------------------------------1
Conduit Key ------------------------------------------1
Junction box plate allows tting of either Vandal dome or
Indoor dome to standard 2S, 4S and Octagon junction
boxes.
NOTE: Flush side of junction box plate should be attached
to junction box
Junction Box tting plate accessories:
Junction Box Fitting plate ------------------------1
2S / 4S plate screws (KM3.5 Type) ------------4
Octagon tting screws (KM4 Type) ------------- 2
Base Fitting Screws PWM3 ----------------------3
JUNCTION BOX PLATE
Screw hole overview Vandal dome tting illustration Junction box tting plate attached to camera
Base Fitting
Screws
88.9 mm
3.5 in
83.3 mm
3.28 in
46.0 mm
1.8 in
Base Fitting
Screw.
Octagon
Screw
2S / 4S
Screw
Locking
Screw
Conduit
Key
Allen Key
Mounting Screws Pack.
3pc 70mm / 2.8in Screws
3pc 30mm / 1.2in Screws
3pc 40mm 1.6in plugs
Comments to this Manuals