Digimerge DNV14TL2 Instruction Manual download pdf (Page 42)

Web Configuration

4. Click OK to save changes. The camera will restart with the new IP

address.

8.7.2 Device Port

The Device Port page (Device Configuration>Device Port) allows you to

configure the camera’s port configuration. The camera has the following

ports:

• Contr

ol port: The default is 30001. Enables video streaming.

• HTTP Port: The default is 80. Enables web access. Please note that if the

HTTP is port is anything other than 80, you must enter http:// before the

camera’s IP address and colon (:) and the HTTP port after the IP address

when connecting using an Internet browser (e.g. if the HTTP port is 85,

enter http://192.168.x.x:85).

• RTSP Port: Default is 554. Only used for special applications requiring

RTSP streaming.

• RTMP Port: Default is 8080. Only used for special applications.

NOTE: If y

ou are configuring multiple IP cameras for individual remote

access (without an NVR or server), you must change all the ports for each

camera. Two cameras cannot use the same port number.

To change camera ports:

1. Cl

ick Device Configuration>Device Port.

2. Configur

e the camera ports as required and then click OK.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

No comments

Digimerge DNV14TL2 Instruction Manual Page 42